16.25" Heavy Medium Contour FAL Barrel. US made by DSA.

16.25" Heavy Medium Contour FAL Barrel. US made by DSA.

This Barrel is as heavy under the handguard as a Standard FAL Heavy Barrel, but is light weight from the Gas Block forward. This is one mean looking barrel! US Made by DSA! Like New Condition! 9/16" 24 TPI, Left Hand Thread.

  • Price: $269.99

16.25" Paratrooper FAL Barrel. FN Made. w/ Vortex Flash Hider.

16.25" Paratrooper FAL Barrel. FN Made. w/ Vortex Flash Hider.

FN Made FAL Barrel cut to 15" and a Vortex Flash Hider professionally welded on making the overall legal length of 16.25". Bore is Good, but shows some wear. Gas Port may need opened larger, but is currently at 0.120".

  • Price: $329.99

FAL 16.25" Short Gas System Barrel w/Piston & Spring. US Made!

FAL 16.25" Short Gas System Barrel w/Piston & Spring. US Made!

Exclusive only at Ernst Armory! Brand new Short Gas System FAL Barrel assembly. Counts for 3 US compliance parts; 13" Chrome Lined Barrel (US), permanently attached Browning Long Flash Hider (US) and Stainless Steel Gas Piston w/Spring (US). DSA...

  • Price: $379.99

FAL Paratrooper Bolt Carrier. DSA (Factory 2nd)

FAL Paratrooper Bolt Carrier. DSA (Factory 2nd)

Paratrooper Bolt Carrier, made by DSA. This is a factory 2nd, with the only defect being a ding on the backside of the carrier. It has a very slight amount of finish were from being installed in a rifle to insure proper fit. Like New Condition!

  • Price: $72.99

FAL SAW Stock. Tapco

FAL SAW Stock. Tapco

Tapco SAW Stock for the FAL Rifle. Fits only Metric Pattern Lower Receivers. New Condition!

  • Price: $29.99

FAL/L1A1 US Made Handguards. Bell & Carlson.

FAL/L1A1 US Made Handguards. Bell & Carlson.

US made FAL and L1A1 Handguards. Manufactured by Bell and Carlson. Good to VG Condition. No hardware included. Counts as a 922r US compliance part.

  • Price: $32.99

FN M249 SAW Pistol Grip. US Made.

FN M249 SAW Pistol Grip. US Made.

Original Unissued M249 SAW Pistol Grips. Made by FN at their facility in the USA. These fit perfect on Metric FAL Rifles. Counts as a US part. Much higher quality than the Tapco ones that are available elsewhere. These accept standard Imbel/FN...

  • Price: $27.99

18" Medium Contour FAL Barrel. US Made by DSA

18" Medium Contour FAL Barrel. US Made by DSA

18" Medium Contour FAL Barrel. US Made by DSA. Heavier than standard FAL Barrels. Would work perfect for a precision long range/target FAL build. Like New Condition. 9/16" 24 TPI Left Hand Thread.

  • Price: $224.99

18" Paratrooper FAL Barrel. US made by DSA

18" Paratrooper FAL Barrel. US made by DSA

18" Paratrooper FAL Barrel. US Made by DSA. Like New Condition. Slightly thicker profile than standard. 9/16" 24 TPI Left Hand Thread.

  • Price: $249.99

18" Paratrooper FAL Barrel. US Made by Remington.

18" Paratrooper FAL Barrel. US Made by Remington.

Custom US made 18" FAL Barrel. Barrel made by Remington. Should produce excellent accuracy! ***Will require a custom Freefloat Handguard, or a standard Handguard can be used if the barrel profile is modified on the chamber end.*** Like New Condition!

  • Price: $219.99

FAL Butt Pad. New!

FAL Butt Pad. New!

Brand new Tapco Butt Pads for Metric Pattern FAL rifles with Humpback stocks. Fits Belgian, Argentine, Brazilian, South African and More! US made! New!

  • Price: $15.99

FAL Furniture Set. US made by Penguin. New!

FAL Furniture Set. US made by Penguin. New!

Complete US Made Furniture Set for Metric Pattern FAL rifles. Made By Penguin. Stock, Handguard, Pistol Grip and Tapco Butt Pad. **Hardware Not Included! Make sure to drill pilot holes for the rear sling and tang screws!** Counts for 3 US Compliance Parts!

  • Price: $94.99

FAL Handguards (Brown). US made by Penguin. New!

FAL Handguards (Brown). US made by Penguin. New!

Brand new Brown US Made Handguards for Metric Pattern FAL rifles. Made by Penguin. May have light scuffs from storage wear. Counts as 1 US compliance Part!

  • Price: $42.99

FAL Handguards. US made by Penguin. New!

FAL Handguards. US made by Penguin. New!

Brand new US Made Handguards for Metric Pattern FAL rifles. Made by Penguin. May have light scuffs from storage wear. Counts as 1 US compliance Part!

  • Price: $42.99

FAL Humpback Stocks. US made by Penguin. New!

FAL Humpback Stocks. US made by Penguin. New!

Brand new US Made Humpback Stocks for Metric Pattern FAL rifles. Made by Penguin. Counts as 1 US compliance Part!

  • Price: $44.99

FAL Magazine US Made Floor Plate

FAL Magazine US Made Floor Plate

Counts as a US Compliance Part (USC 922r). Fits only Metric Pattern FAL Magazines. New US Made!

  • Price: $2.49

FAL Pistol Grip (Brown). US made by Penguin. New!

FAL Pistol Grip (Brown). US made by Penguin. New!

Brand new Brown US Made Pistol Grips for Metric Pattern FAL rifles. Made by Penguin. Counts as 1 US compliance Part! May have some light scuffs from storage wear.

  • Price: $12.99

FAL Pistol Grip. US made by Penguin. New!

FAL Pistol Grip. US made by Penguin. New!

Brand new US Made Pistol Grips for Metric Pattern FAL rifles. Made by Penguin. Counts as 1 US compliance Part!

  • Price: $12.99

Falcon Arms US made HTS set for FAL rifles!

Falcon Arms US made HTS set for FAL rifles!

Falcon US made Hammer, Trigger, Sear set for Metric pattern FAL rifles. Counts for 3 US Compliance Parts (922r)! Brand New!

  • Price: $64.99

FN M249 SAW Flash Hider. US Made.

FN M249 SAW Flash Hider. US Made.

These flash hiders were manufactured by FN for the M249 SAW. They are profiled the same as a FNC, but with an extra cut. These work perfect on the FAL! Standard FAL Bayonets, Grenades and Blank Firing Adapters will work with this. They are 9/16"...

  • Price: $49.99

Vortex Flash Hider. US Made

Vortex Flash Hider. US Made

Vortex Flash Hider in 9/16" 24 TPI LH Thread. Works on most standard Metric FAL Barrels. US Made!

  • Price: $69.99